Clean your screen with the cleaning wipes provided.

Pull back and remove the protective film from one side of the tempered glass.

Position the screen protector carefully in place on your phone.

Pull back and remove the protective film from the tempered glass, give it a clean with the micro fibre cloth, and you're done!

Make sure to get in touch if you have any quesions.

Make sure you have a clean and flat surface to work on. Like most things in life preparation is key and making sure your phone screen is clean and dust free will ensure you have a great result once your screen protector is in place.

Place your phone into the applicator tool.

Note. for Google Pixel models, you will need to use the additional locking mechanism to secure your device

Wipe the screen with the cloth to ensure it is clean and dry.

Blot the screen with a dust sticker to remove any dust particles.

Peel off the film and align the holes in the screen protector tabs to the notches on the applicator tool.

You might want to do a test run aligning the tabs to the notches before you peel off the film.

Stick the screen protector down using the scraper card and remove any bubbles.

Carefully peel off the top layer using the screen protector tabs and remove your phone from the applicator bed.

Use the scraper card and cloth to push out any remaining bubbles and you're done!

Make sure to get in touch if you have any questions.

Clean and dry your camera, removing any dirt from the lens. 

Use the pull tab to peel off the protective film on the back of the lens protector to expose the adhesive. 

Align the lens protector with the camera on the back of your phone and apply a small amount of pressure on the edges of the lens protector and you're done!

Make sure to get in touch if you have any questions.